How to Ship a Non-Running Excavator: Loading, Trailer Options & Transport Tips

Excavator Transport on a conestoga trailer.

If you’ve ever owned or purchased a broken-down excavator, you know that moving such a heavy piece of equipment can be challenging. Whether the excavator sits at a job site, dealership, auction yard, or private property, it doesn’t necessarily need to run to ship. However, its mechanical condition matters. Knowing whether the excavator can roll, steer, and brake helps us determine how we’ll load it, what equipment we may need, and how to plan the shipment.

Can You Ship an Excavator That Doesn’t Run?

Yes, you can transport an excavator even if it doesn’t start or operate normally. However, the machine’s condition will determine how it needs to be loaded and what equipment is required.

Before scheduling transport, determine whether the excavator can roll, steer, and brake. An excavator that does not start but still rolls freely may be much easier to load than one with locked tracks, damaged components, or other mechanical problems that prevent it from moving.

Describing the excavator’s condition before pickup lets the transport team plan the loading process and send the right trailer and equipment.

The important question is what the excavator can still do.​

Excavator condition Likely loading method Information needed before pickup
Runs and drives Drives onto the trailer Confirm that it steers and brakes normally
Runs but won’t drive Winched onto the trailer Confirm whether it rolls freely
Doesn’t run but rolls Loaded with trailer’s winch Confirm whether the brakes release
Doesn’t run and brakes are locked Brake release or additional loading assistance Determine whether the brakes can be manually released
Missing parts or seized Crane or forklift may be required Weight, lift points, missing parts, and exact condition

How is a Non-Running Excavator Loaded?

The loading method for a non-running excavator depends on which parts of the machine still work. No single loading method works for every broken-down excavator.

If the excavator rolls freely, a trailer equipped with a winch may be able to pull the machine onto the deck. If the machine is completely immobilized, you may need additional loading assistance.

Site conditions also matter. The transporter should know whether there is enough space for the trailer to enter and maneuver, whether the ground is stable, and whether loading equipment is already available at the pickup location. Providing photos of the excavator and the surrounding pickup area can help identify potential loading or access problems before pickup day.

What to Measure Before Shipping a Non-Running Excavator

Measure the excavator as it will actually travel. Manufacturer specifications are useful as a starting point, but the machine sitting in front of you may have a different bucket, counterweight, tracks, thumb, coupler, or other attachment.

Record four numbers:

  • Transport length
  • Transport Width
  • Transport Height
  • Approximate operating weight

For transport length, measure from the furthest point to the furthest rearward point with the boom and bucket positioned for transport.

For width, measure the widest point from one side to the other. Do not assume the tracks are the widest part. A bucket, blade, track pads, or attachment may extend farther.

For height, measure from the level ground to the machine’s highest point while it is in its transport position.

Operating weight should represent the excavator as it will actually be shipped, including counterweights and attachments that will remain on the machine.

These measurements affect the trailer, route, and permit requirements. Measure the actual machine rather than relying entirely on a spec sheet.

Excavator Shipping on an RGN trailer

What Trailer Is Used to Transport a Non-Running Excavator?

The right trailer depends on the excavator’s dimensions, weight, condition, and loading requirements. Excavators are commonly transported on equipment trailers such as lowboys, removable gooseneck trailers, or RGNs. Smaller excavators may have additional trailer options depending on their size and weight.

An RGN can be particularly useful when equipment needs drive-on or assisted loading because you can detach the front portion of the trailer, creating a lower loading point. However, trailer selection should be based on the individual excavator’s specifications rather than assuming one trailer will work for every machine.

Accurate length, width, height, and operating weight are important when selecting a trailer. Also disclose attachments such as buckets, thumbs, breakers, or other components, as they may change the machine’s transport dimensions or require additional deck space.

Does a Non-Running Excavator Cost More to Transport?

A non-running excavator may require extra loading equipment and planning, but its operating condition is only one part of the quote.

The final transport price can also be affected by:

  • Distance between pickup and delivery
  • Excavator length, width, height, and weight
  • Trailer requirements
  • Loading assistance
  • Oversize or overweight permits
  • Escort requirements
  • Pickup and delivery access
  • Scheduling requirements

A dead excavator that rolls freely and can be winched onto the trailer presents a different job from a completely immobilized machine that requires a crane.

Dimensions can affect the price independently of the mechanical problem. A wide or tall excavator may require oversize permits regardless of whether its engine runs.

That is why the transport quote should start with the machine, not a simple price-per-mile estimate. Determine what you’re moving, its size, how it will be loaded, and the trailer and route it requires before estimating the full shipment.

Check Pickup and Delivery Access Before the Truck Arrives

The right trailer and loading equipment will not help if the truck cannot reach the excavator.

Check the pickup and delivery locations before scheduling the move. The carrier may need room to enter the property, position the trailer, load or unload the excavator, turn around, and exit safely.

Look for:

  • Narrow gates or entrances
  • Tight turns
  • Soft or uneven ground
  • Low overhead clearances
  • Parked equipment blocking access
  • Limited space for a long truck and trailer
  • Construction or road restrictions near the property

Photos are useful here. Take pictures of the excavator where it currently sits along with the entrance, surrounding ground, and available loading area.

For non-running machines, site access is especially important because the excavator may not be able to move itself to a more convenient loading area.

Shipping a Non-Running Excavator From an Auction or Job Site

If you purchased the excavator at an auction, confirm the pickup requirements before scheduling the truck. Find out when the machine can be released, the facility’s pickup hours, and whether loading assistance is available.

Do not assume the auction will load a non-running excavator. Ask specifically what assistance the facility provides and tell the transport company what you learn.

The same principle applies to a job site. Determine where the excavator is located on the property and whether a truck and trailer can reach it. If the machine is sitting in mud, behind other equipment, or in an area with limited turning room, disclose that before pickup.

A few photographs can prevent a much larger problem on load day.

What to Send Us Before Shipping a Non-Running Excavator

You do not need to diagnose or repair the excavator before requesting a transport quote. Start with the information you know.

Send:

  • Year, make, and model
  • Measured transport length, width, and height
  • Approximate operating weight
  • Whether the engine starts
  • Whether the excavator rolls
  • Whether it steers
  • Whether the brakes release
  • Condition of the tracks
  • Attachments staying with the machine
  • Pickup and delivery locations
  • Requested transport date
  • Photos of the excavator
  • Photos of the pickup area if access may be difficult

If you are unsure about one of those items, say that instead of guessing. Heavy Equipment Shipper can use the machine information, measurements, photos, and operating condition to determine what still needs to be confirmed before pickup.

Prepare the Excavator for Pickup

Once you’ve determined the loading plan and trailer, prepare the machine for transport.

Position the boom, bucket, and other attachments for travel, as the machine’s condition allows. Identify any attachment that will be removed and shipped separately. Remove loose personal items or unsecured materials from the cab and document the machine’s condition with photographs before loading.

If the machine has locked brakes or another mechanical issue that requires a specific release procedure, make sure that information is available before the driver arrives.

For a machine located at an auction, dealership, or job site, confirm that the person responsible for releasing the excavator will be available during the scheduled pickup window.

The goal is to resolve questions about the machine before the truck arrives, not during loading.

Inspect the Excavator at Delivery

Inspect the excavator when it arrives. Compare its condition with the photographs taken before pickup and walk around the machine before the driver leaves.

Look at the tracks, boom, bucket, cab, counterweight, and any attachments that traveled with the machine. If you notice a difference in its condition, document it and note it on the delivery paperwork.

Keeping pickup photographs and completing the delivery inspection creates a record of the machine’s condition before and after transport.

Get a Non-Running Excavator Transport Quote

You don’t need to determine the trailer, permits, route, or loading equipment yourself.

Start with the excavator.

Send Heavy Equipment Shipper the year, make, model, dimensions, approximate weight, pickup and delivery locations, and photos. Most importantly, describe what the excavator can and cannot do. Tell us whether it starts, rolls, steers, and brakes.

From there, we can determine the loading requirements, match the excavator to the appropriate trailer, check the route, and plan the shipment before the truck arrives.

[Get My Excavator Transport Quote]

 

 

 

Frequently Asked Questions

Bottom Line

Facebook
Twitter
LinkedIn

Elizabeth Meyer

Elizabeth Meyer is a seasoned author specializing in blogs and articles focused on heavy equipment shipping. With extensive experience in logistics and transportation, Elizabeth provides expert insights into the complexities of shipping large machinery and equipment.

Latest Post

Get Your Free Custom Quote in Minutes!

What are you shipping?
Vehicle Origin Address
Vehicle Destination Address
Vehicle Information
Contact Information